Residential · Las Vegas, NV
If your stucco is wicking moisture, cracking at the bottom edge, or trapping water behind the plaster, the fix often starts with the stucco weep screed and flashing details. Superior Stucco Las Vegas has served Las Vegas since 2019, repairing corroded, buried, or improperly lapped weep screeds to restore drainage and protect framing.
Prep and base work starts with locating the termination point and confirming the existing screed type (galvanized steel, G-90 minimum where appropriate) and condition. We protect hardscape, drill and patch test areas as needed, and remove the lower stucco band cleanly to expose the screed, building paper or WRB, and lath. Where failures are found, we correct the assembly from the substrate out, replacing damaged lath, adding self-furring expanded metal lath, and installing new weep screed sections with proper overlaps, corners, and end dams where required. We also correct grade issues when the screed is buried, including trimming back soil or removing stucco that sits too close to slabs so the drainage gap can actually work.
Las Vegas heat, wind-driven rain, and irrigation overspray punish bottom edges first, especially where stucco meets flatwork, planters, and pool decks. We rebuild the lower system using a true three-coat stucco approach where needed, scratch coat and brown coat with proper curing, then a matched finish coat. You can choose acrylic finish, cement plaster, or a color coat system depending on the existing elevation, and we can recreate common textures like lace, sand float, or dash. Control joints and sealant joints are checked around doors, hose bibs, and penetrations so water sheds away from the wall instead of feeding the base.
Customers choose us because we diagnose the cause, not just the stain. We treat stucco weep screed problems as a drainage and flashing detail, verifying lap direction (shingle style), WRB continuity, and clearance to grade and concrete. Our crews use correct fasteners, corrosion-resistant accessories, and clean cut lines so the repair blends and performs. You get clear communication, photos of what we find behind the stucco, and a written scope that spells out materials, thickness build-up, and texture matching.
At the end of the job we walk the elevation with you, confirm weep holes and drainage paths are open, and point out any maintenance items like soil buildup, sprinkler aim, or caulk that should be replaced on a schedule. You receive a clean site, a documented repair area, and guidance on paint and cure times if a coating is involved. If framing or sheathing damage is discovered, we show it immediately and explain options before proceeding. The goal is a bottom edge that drains, dries, and stays tight, so you are not repeating the same repair next season.
Yes. We provide a free written estimate after reviewing the walls on site and confirming access, texture, and the repair scope.
Yes. We match common textures such as lace, Santa Barbara smooth, dash, and sand finishes by adjusting mix, aggregate, and application technique, then blending to reduce patch visibility.
Small repairs can take a day, while larger resurfacing or full re-stucco projects can take several days to a few weeks depending on square footage, access, and curing windows.
Yes. We handle residential exterior walls and additions, and commercial façades, common-area walls, and maintenance repairs for property managers.
Photos help, but an on-site visit is best to confirm substrate type, existing assembly, texture, height/access needs, and any damaged areas that require demo or lath repairs.
A failing stucco weep screed can trap water at the base of your wall, causing cracking, staining, and hidden damage behind the plaster. The weep screed is not decorative, it is a drainage and termination accessory that lets moisture exit the wall assembly while providing a clean edge for lath and plaster. When it is buried by soil, installed backwards, rusted through, or sealed over by patchwork, water has nowhere to go. Superior Stucco Las Vegas focuses on correcting the detail the right way, exposing the base, rebuilding the WRB and lath as needed, and restoring the finish so the wall drains and looks consistent.
Most weep screed issues start with clearance and laps. If the bottom edge sits tight to soil, mulch, pavers, or a slab, the screed cannot drain and the plaster stays wet. We cut back the lower stucco in a controlled band, inspect the accessory, then replace or reset it so it terminates correctly and maintains a functional gap. Where paper or housewrap is damaged, we repair the WRB in shingle fashion and tie it into the new screed so moisture exits at the exterior.
Flashing details matter at transitions, too. We check wall-to-slab conditions, door thresholds, patio and pool deck edges, and penetrations near the base where water often gets trapped. If the existing work used incorrect sealants or buried fasteners, we correct those points before replastering. Repairs are finished with compatible base coats and a blended texture and color system so the patch does not stand out.
If you see swelling stucco, a rust line at the bottom, crumbling edges, or recurring damp marks after rain or irrigation, it is worth having the stucco weep screed evaluated before damage spreads. Our process is straightforward: inspect, document, repair the drainage detail, then restore the finish. Request a free written estimate and we will explain exactly what needs to be corrected and why.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Las Vegas. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
