Residential · Las Vegas, NV
Traditional stucco is the classic three-coat cement plaster system that builds a hard, breathable exterior when it is installed correctly. Superior Stucco Las Vegas has served Las Vegas since 2019, handling new traditional stucco installation, crack repair, patching, recoat work, and full tear-off and replacement when the base has failed.
Prep and base work decide whether traditional stucco lasts. We protect doors, windows, and hardscape, then evaluate sheathing, paper, and existing lath for rust, loose fastening, and trapped moisture. For new work we install a weep screed at the base, corrosion-resistant metal lath with proper laps, and a code-appropriate weather-resistive barrier (typically two layers of Grade D building paper or equivalent). Control joints, casing beads, and accessories are set straight, then the scratch coat is applied, scarified, and allowed to cure before a level brown coat is floated for flatness and thickness.
Las Vegas heat, wind, and low humidity can flash-dry cement plaster and cause shrinkage cracking if curing is rushed. We plan work around temperature and sun exposure, mix consistently, and damp-cure as needed so the coats hydrate instead of drying out too fast. Finish options include sand float, lace, dash, and smooth trowel finishes, with pigments or paint-ready textures depending on your goals. If you are repairing existing traditional stucco, we match texture and aggregate, blend into adjacent planes, and re-establish proper slope and drip edges around penetrations to shed water.
Customers choose us because we treat traditional stucco like a system, not a patch. You get clear scope, straightforward pricing, and a crew that can diagnose common failures such as delamination, hollow spots, rust jacking at lath, and recurring step cracks at corners. Our repairs address the cause, including failed flashing, missing weep screed function, improper paper laps, and uncontrolled movement, not just the visible crack. We are licensed and insured, and we provide a written plan that explains prep, materials, curing, and finish so expectations are set before we start.
Before we wrap up, we do a walkthrough to confirm straight lines, clean terminations at trims, consistent texture, and uniform color when pigmented. We clean the jobsite, remove masking, and leave the wall ready for paint if specified, including recommended primer and cure time guidance for cement plaster. You receive a free written estimate up front, a defined scope for installation or repair, and practical maintenance notes for caulking, paint cycles, and water management. If we uncover hidden substrate damage during demo, we document it and discuss options before proceeding so there are no surprises.
Yes. We provide a free written estimate after reviewing the walls on site and confirming access, texture, and the repair scope.
Yes. We match common textures such as lace, Santa Barbara smooth, dash, and sand finishes by adjusting mix, aggregate, and application technique, then blending to reduce patch visibility.
Small repairs can take a day, while larger resurfacing or full re-stucco projects can take several days to a few weeks depending on square footage, access, and curing windows.
Yes. We handle residential exterior walls and additions, and commercial façades, common-area walls, and maintenance repairs for property managers.
Photos help, but an on-site visit is best to confirm substrate type, existing assembly, texture, height/access needs, and any damaged areas that require demo or lath repairs.
Traditional stucco, also called cement plaster, is a time-tested exterior cladding built in coats over a weather-resistive barrier and metal lath. When installed to proper thickness, cured correctly, and detailed with the right accessories, it creates a durable shell that resists impact, handles heat, and takes paint well. Superior Stucco Las Vegas installs and repairs traditional stucco for homes and commercial buildings, from small crack repairs to full three-coat restoration when the base layers are compromised.
A traditional stucco wall performs best when each layer is treated as part of one assembly. That starts with sound sheathing, two-layer Grade D paper (or equivalent), correct paper laps and flashing tie-ins, and properly installed lath with tight overlaps and fasteners into framing. From there, the scratch coat is keyed into the lath, the brown coat is floated flat, and the finish coat is applied with a consistent mix and texture method. Done right, the result is a straight, solid wall that resists cracking and holds up under sun and wind.
For repair work, the goal is to restore bond and continuity, not just hide defects. We cut back to solid stucco, replace compromised paper and lath when needed, and rebuild coats to match surrounding thickness. Common calls include spider cracking, corner cracks, impact damage, and areas that sound hollow from delamination. We also correct water-related issues at penetrations, parapets, and wall-to-roof lines when those details are contributing to staining or repeated failure.
If you are considering traditional stucco for new construction or you need an honest assessment of an older wall, we can help you choose the right repair or replacement approach. Expect clear options, finish samples when needed, and a jobsite that is protected and cleaned daily. Request a free written estimate and we will walk the property, measure, and explain what your traditional stucco project requires.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Las Vegas. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
